How To Use An E-nail

🤔 Instructions & Assembly

1. Turn On / Off: By pressing power button 5 times

   
   

2. Select Your Temperature: Use the + and - button

   
   

3. Then HOLD Power Button 3 Seconds To Select Said Temperature: Device will vibrate and the LED display will race towards the selected temperature

   
   

4. When device reaches desired temperature it will vibrate again and you'll notice the 60 second timer begin.

   
   

5. NOW is the time to insert your concentrate / wax, close the lid and inhale

   
   

6. Cool Down: After 60 second timer device will begin to cool down. To dab again, repeat the above steps starting with the select your temperature. Auto safety shut off kicks in after 60 minutes of inactivity

🧼 How To Clean Your Enail

Best Practices After Every Use:

1. Dry Run: Crank then enail up to hottest temperature, do not insert any wax, and allow the device to run-through, burning away any leftover material.

   
   

2. Allow device to cool after dry run

   
   

3. Dab Q-tip in isopropyl alcohol: And wipe away any material inside the quartz dish. This could take 1 Q-tip or a couple

   
   

4. This quick process will keep your enail working GREAT and will save a ton of time when you do have to do a deep clean.

Deep Clean; About Once A Month Depending On Usage

Unscrew the metal joint: Soak in isopropyl alcohol or store bought cleaning solution

Clean where metal joint was with isopropyl alcohol soaked Q-tip

Dry metal joint and reattach

If need be, clean the quartz dish / wax loading area just like you would in the above Best Practices After Every Use.

And that's it, you're done!

Any more questions please email us at customerservice@thefreezepipe.com or click here to view the user manual.

🍯 Awesome Rigs For Your E-nail: