Everything You Need To Know About Your Freeze Pipe Combo Bong

Cleaning

Cleaning is easy and done just like a traditional piece. We also sell cleaning caps, plugs and solution that work great on all Freeze Pipe pieces!

What You Will Need:

• Any store-bought glass cleaning solution or homemade solution (coarse sea salt + 99% isopropyl alcohol).

• Large ziplock bags (optional).

• Soft brushes or pipe cleaners (optional).

Cleaning the Coils:

Step 1 - Remove the XL Revolver and Revolver Coils from the piece. Place each in a ziplock bag or plug both ends securely.

Step 2 - Submerge the coils in your cleaning solution and gently shake or tilt to loosen residue.

Step 3 - For a deeper clean, let the coils soak for 10–15 minutes.

Step 4 - Rinse thoroughly with room-temperature water and ensure they are completely dry before freezing.

Cleaning the Base/Water Tanks:

Step 1 - Empty the tanks of any old water.

Step 2 - Add cleaning solution to each tank, filling them about a quarter of the way.

Step 3 - Cover all open ends securely (using plugs or paper towels) and gently shake to spread the solution.

Step 4 - For tougher buildup, allow the tanks to soak for 10–15 minutes.

Step 5 - Rinse thoroughly with warm water and let them air dry before reassembling.

Assembly

Filling the Base and Water Tanks 💧

1. Add water to the flower tank until the disc perc slits are fully submerged.

2. Fill the dab tank until the double showerhead perc slits are covered.

3. Avoid overfilling to ensure smooth airflow and prevent splashing during use.

Attaching the Glycerin Coils ❄️

1. Place the 34mm XL Revolver Glycerin Coil on top of the flower tank, aligning it properly.

2. Connect the smaller Revolver Glycerin Coil to the 18mm joint on the dab tank, located at a 45-degree angle.

3. Secure both coils with the included clips, positioning the larger side of each clip toward the base and the smaller side toward the coil.

4. Confirm all connections are secure and airtight for stability and optimal performance.

Pro Tips for Assembly 👷‍♂️

• Freeze the glycerin coils for at least one hour before attaching for the coolest, smoothest experience.

• Always test the water levels and airflow before use to ensure proper setup.

• Secure all clips tightly to prevent instability during use.

  
  

With everything in place, your Combo is ready to deliver unparalleled smoothness and versatility!

FAQs

How Long Do I Freeze The Glycerin Chamber For?

1-hour is all you need. But you can leave the chamber in the freezer in between sessions.

What Coils Fit On The Combo Bong?

The flower tank uses our 34mm XL Revolver Coil, while the dab tank uses the smaller 18mm Revolver Coil.

Should I Freeze The Whole Unit?

NO! Only the coils should be frozen as water could expand in the base causing it to crack.

What's The Safest Way To Put The Clip On?

The best way to put the clip on is to support the back of the joint with your hand and push the clip into place.

Can I clean it with hot water?

NO! The best method is to use either our solution or salt and alcohol solution to clean your piece. Hot water can cause damage to the glass and potentially cause breakage.

You May Also Like:

Shop By Category: